Please contact me at: ray_mcavoy@yahoo.com if you would like to purchase any of these parts.

Additional photos, measurements, shipping cost estimates, and other information available upon request.

I ship most items via USPS and can accept payment through PayPal or USPS Money Order.

The following are NEW unused parts that I have left over from my various restoration projects.

• 1958 - 1965 348/409 Interlocking Engine Mounts.
  
  This is a pair of new reproduction/replacement engine mounts for 58-65 Chevy cars with 348 or 409 engines. They have interlocking tabs that help keep the rubber and steel from pulling apart. These are the "short-wide" style mounts that measure 1-9/16" from the engine block to the center of the through-bolt hole and 2-5/8" between the mounting ears that attach to the frame perches. These will likely fit other Chevy small & big block V8's that use the "short-wide" style mounts. These are new (still in the box) reproduction parts.
  Price: $30 + shipping



---



• 1963 - 1964 340HP 409 Stainless Steel Fuel Line.
  
  New reproduction stainless steel fuel line that fits 63 and 64 340hp 409 engines with the original carburetor. ShowCars part #8040. This was purchased for Dad's 63 but we ended up using a Carter carburetor and had to make a different fuel line to fit. This one is new and unused. ShowCars price on this part is $78.
  Price: $55 + shipping



---



• Weiand 8004 Aluminum Intake Manifold for Small Block Chevy V8.
  New in the box Weiand 8004 aluminum intake manifold for 1986 & earlier Small Block Chevy V8. I bought this several years ago and never used it. Includes all the original paperwork and the 4 bolts (with smaller sized heads) for the 4 center locations.
  Price: SOLD
  

  ---

  
  
• Four Windage Tray Studs GM#10224104 These fit GenV big block Chevy engines. They list for $11 each on sites such as GMPartsDirect.com Photos available upon request
  Price: $25 (for all 4) + shipping



---



• Performance Stainless Steel #1041 Heater Hose Fitting.
  New in the un-opened package Performance Stainless Steel brand heater hose fitting. This is a 45° fitting with ½" pipe threads on one end and a ⅝" hose barb on the other. Photos available upon request
  Price: $22 + shipping



---



• Various Engine Gaskets.
  
  
  These are all new unused gaskets. They are "old stock" that has been sitting around for a while. Most of them are still in their original packaging but some are not.
  
  
  • Victor #VS50053 ... 87-94 Chevy 2.8L/3.1L V6 Valve Cover Gaskets
    New in package. Price: $8 per pair + shipping
  • Victor #VS39763 ... 78-87 Buick 181/196/231/252 V6 Valve Cover Gaskets
    New in package. Price: $8 per pair + shipping
  • Victor #VS50024TC ... GM 4.3L V6 Valve Cover Gaskets
    New in package. Price: $8 per pair + shipping
  • Victor #PS38113 ... 62-84 GM 194/215/230/250 Inline-6 Side Cover Gaskets
    I have 3 pairs of these all new in package. Price: $8 per pair + shipping.
  • Victor #VS39693 ... 62-84 GM Inline-6 194/215/230/250/292 Inline-6 Valve Cover Gasket
    Fits engines with non-integral head/intake. New in package. Price: $8 + shipping.
  • Victor #VS38420 ... 65-90 GM 366/396/427/454 V8 Valve Cover Gaskets
    I have 2 pairs of these (one in a Victor package, the other in a Napa/Victor package). Price: $10 per pair + shipping
  • Victor #VS39747 ... 75-96 Ford 300/4.9L Inline-6 Valve Cover Gasket
    New in package. Price: $8 + shipping
  • Victor #VS39745 ... Chrysler 170/198/225 Slant-6 Valve Cover Gasket
    New in package. Price: $8 + shipping
  • Victor #VS38300 ... 62-86 Ford 221/255/260/289/302/4.2L/5.0L V8 Valve Cover Gaskets
    I have 5 of these gaskets (one in an opened package and the rest loose). Price: $10 per pair + shipping -OR- $20 for all five + shipping
  • Victor #VS38320 ... 68-81 Buick 350/5.7L V8 Valve Cover Gaskets
    I have 5 of these gaskets (2 in an unopened package and 3 loose). Price: $10 per pair + shipping -OR- $20 for all five + shipping
  • FelPro #VS50339R ... 90-96 Chrysler 201/3.3L V6, 91-93 Chrysler 231/3.8L V6 Valve Cover Gaskets
    New in package. Price: $10 per pair + shipping
  • FelPro #VS50184R ... 76-89 Chrysler 318/360 V8, 76-92 Chrysler Truck 318LA/360 V8 Valve Cover Gaskets
    New in package. Price: $10 per pair + shipping
  • FelPro #VS50272R ... 85-89 GM/Jeep/Eagle 173/2.8L V6, 90-95 GM 189/3.1L V6, 89-94 Chevy/GMC/Isuzu Truck 2.8L/3.1L V6 Valve Cover Gaskets
    New in package. Price: $10 per pair + shipping
  • FelPro #VS50156R ... 82-84 GM 181/3.0L V6, 78-79 GM 196 V6, 84-88 GM 231/3.8L VIN-A / 84-85 VIN-3 / 86-88 VIN-7 / 84-85 VIN-9 / 77-83 even firing / 80-82 252/4.1L V6 Valve Cover Gaskets
    New in package. Price: $10 per pair + shipping
  • FelPro #MS94054 ... Chevy 350/5.7L V8 Exhaust Manifold Gaskets
    New in package. Price: $10 per pair + shipping



---



• More Miscellaneous Gaskets.
  
  Several more unidentified gaskets. These are new but no longer in their original packaging. Feel free to send me an email at ray_mcavoy@yahoo.com for additional photos, dimensions, etc.
  Price: $1 each + shipping



---



• Walker Muffler #21314.
  This is a new unused muffler that's been sitting in the garage for several years. It has a 2" inlet and outlet. My old Walker book lists it as fitting the following vehicles: 1956 - 1964 full size Chevy (all models) with V8 or inline-6, with single or 2" dual exhaust. Also listed as fitting 1958 - 1960 ElCamino/GMC Caballero with V8 or inline-6. Photo available upon request
  Price: $38 + shipping



---



• NOS AC & Standard/Hygrade fuel pumps.
  
  These are three NOS (new old stock) AC fuel pumps that have been sitting in the garage for several years. According to an old AC-Delco parts book, these pumps fit the following applications:
  • #41124 (on the left in photo) fits 1974-78 Ford trucks with 360/390 8-cyl.
  • #42334 (middle in photo) fits 1982-86 Ford/Mercury, 82-83 Ford truck, and 82 Lincoln with 230 6-cyl.
  • #41446 (on the right in photo) fits 1975-79 Ford/Mercury and 77-82 Ford industrial units with 302/351W 8-cyl.
  I also have a new in the box Standard Motor Products Hygrade #42072 fuel pump (pictures available upon request). I believe this fits early to mid 80's Ford Escort / EXP and Mercury Lynx / LN7.
  Price: $10 each + shipping



---



• NOS NPD (National Parts Distributors) distributor caps and rotors.
  
  Several NOS (new old stock) distributor caps and rotors that fit various 4 and 6 cyl engines.
  For GM: #D339 cap & #D434 rotor. Both fit 4-cyl.
  For Chrysler: #DR314 rotor.
  #CH219 cap & two #CH314 rotors.
  #CH233 cap & un-labeled rotor (appears to be equivalent to Standard #CH305).
  For Ford: #DH390 4-cyl distributor cap.
  #DH433 6-cyl distributor cap.
  and #DR322 4 & 6-cyl rotor.
  
  Important: A few of these boxes have labels that are missing, hard to read, or that appear to have been re-labeled. So I'll be glad to send close-up pics of the exact parts to help ensure they are correct for your vehicle.
  
  Price: $6 each or two for $10 + shipping

The following are USED parts that I have removed from my parts cars and/or projects.

• 1958 - 1965 348 Harmonic Damper.
  
  This is a good used 6" harmonic damper. I believe it is for a 348 but it will also fit a 409 or early small block. The timing mark is directly inline with the keyway slot. It has been cleaned, primed, painted, and has a stainless sleeve installed over the seal area. There are a marks where a previous installer pounded this on with a hammer but once installed those are covered by the pulley.
  Price: $70 + shipping



---



• 12V Delco Remy Generators.
  
  I have two 12V Delco Remy generators for sale. Both are untested and being sold as-is. These will likely need to be rebuilt with new bearings, brushes, etc. before they will be useable.
  
  
  • Model # 1102276, Serial 2B12. I believe this is a 35A generator for various 1961 & 1962 Oldsmobile applications.
  • Model #1102097, Serial 1M27. I believe this is a 30A generator for various 1956 through 1962 Chevrolet, and some Pontiac applications.
  • Model #1100326, Serial 6L 5. I believe this is a 25A generator for various 1956 & 1957 Chevrolet applications. SOLD
  
  Price: $35 each + shipping



---



• Two Small Block Chevy 350 TBI setups.
  Two TBI (throttle body injection) setups removed from Chevy 350 engines. One is from a 1990 full-size Blazer and includes the aluminum intake manifold and throttle body. The second setup is from a 1988 full-size Blazer and also includes the aluminum intake manifold and throttle body as well as the wiring harness and ECM (engine control module). Photos available upon request
  Price: $100 (setup #1 with intake and throttle body)
  Price: $175 (setup #2 with intake, throttle body, wiring, and ECM)
  

  ---

  
  
• Chevy 250 inline 6 Main & Rod Bearing Caps
  I have all 7 main bearing caps available but only 5 rod bearing caps. Bolts NOT included. Photo available upon request
  Price: $10 + shipping



---



• Chevy inline-6 Water Pump
  
  In good used condition.
  Price: $10 + shipping



---



• Unknown Metal Tube off Chevy inline-6
  Possibly for a power brake vacuum line. Photo available upon request
  Price: $2 + shipping



---

Please contact me at: ray_mcavoy@yahoo.com if you would like to purchase any of these parts.

Additional photos, measurements, shipping cost estimates, and other information available upon request.

I ship most items via USPS and can accept payment through PayPal or USPS Money Order.

This page last updated on: 3/29/24